| Specifications |
|
|
| Model |
|
UT25CL |
| Transmitter |
|
|
| Output frequency |
|
33 KHz |
| Energised wire voltage range |
|
AC / DC 8 to 480 V 50 / 60 Hz |
| Accuracy |
|
2.5% ± 3 deg |
| Screen |
|
LCD (TN translucent) |
| Backlight |
|
Yes |
| Code Value |
|
1, 2, 3, 4, 5, 6, 7 |
| Signal Strenght |
|
Three Levels 1, 2, 3 |
| Unitpolar Test |
|
Energized wire test |
| |
|
max voltage 480V |
| Bipolar Test |
|
Energized wire test |
| |
|
max voltage 480V |
| ELV LED indicator |
|
1: If the input voltage exceeds 25V, |
| |
|
the ELV LED turns on. |
| |
|
2: As the voltage rises, the brightness |
| |
|
of the ELV LED increases |
| |
|
3: In any other case, the ELV LED |
| |
|
will be dim or not illuminated. |
|
Receiver
|
|
|
|
Receiving frequency
|
|
33 KHz
|
| Tracing depth |
|
approx Around 0 to 2.5m |
| |
|
(unipolar mode; single-circuit) |
| |
|
approx 0 to 0.5m (bipolar mode) |
| NCV voltage |
|
80 to 1000 V - 50 / 60 Hz |
| Voltage detection depth |
|
approx 0 to 0.4 meters |
| Code Value |
|
1, 2, 3, 4, 5, 6, 7 |
| Signal Strenght |
|
Three Levels 1, 2, 3 |
| Multi-transmitter compatible |
|
Up to 8 units |
| Other Features |
|
|
| Flash Light |
|
Yes |
| Back Light |
|
Yes |
| Manual sensitivity adjustment |
|
Yes |
| Over-voltage category |
|
CAT III 480V |
| Pollution degree |
|
2 |
| IP Rating |
|
IP54 |
| Accessories |
|
Dual in-line test leads |
| |
|
Alligator clips |
| |
|
Lantern-tip test probe |
| |
|
AC polarized plug wire |
| |
|
6x 1.5V AA alkaline battery |
| |
|
6x 1.5V AAA alkaline battery |