Product Description:
These servos have a continuous 360-degree rotation. The shaft does not have a mechanical stop limit. The speed of rotation of the shaft is proportional to the pulse width as shown in the table below. Software written for MG995-180 and other 180-degree servos is unsuitable for this model.
| Model |
|
MG995 |
| Gear Type |
|
Metal Gear |
| Servo Type |
|
Digital |
| Operation Voltage |
|
4.8 to 7.2 V |
| Operating Current no load |
|
0.17 A |
| Stall torque @ 4.8V |
|
9.4 kg / cm |
| Stall torque @ 6.0V |
|
11 kg / cm |
| Operating Speed |
|
0.2 s/60º (4.8 V), 0.16 s/60º (6 V) |
| Dead band width |
|
0.09 msec |
| Temperature range |
|
-30 to +60°C |
| Connector wire length |
|
30 cm |
| Connections |
|
|
| Red |
|
Positive Supply |
| Brown |
|
Negative Supply |
| Orange |
|
Signal |
| Dimensions |
|
40.7 x 19.7 x 42.9 mm |
| Weight |
|
55g |
| Rotation |
|
Pulse Width |
| Clockwise |
|
0.800 to 1.450 ms |
| Stop |
|
1.450 to 1.540 ms |
| Counter Clockwise |
|
1.540 to 2.200 ms |
Rotation direction as viewed from the shaft end.
