| Type |
|
Finder 40.52.9.024.5000 |
| Contact Configuration |
|
2 Change Over (DPDT) |
| Rated current / Maximum peak current |
|
8 A |
| Rated voltage / Maximum switching voltage |
|
250 / 400 VAC |
| Rated load AC1 |
|
2000 VA |
| Rated load AC15 (230V AC) |
|
750 VA |
| Single phase motor rating (230VAC) |
|
0.37 kW |
| Breaking capacity DC1: 30 / 110 / 220V |
|
8 / 0.6 / 0.25A |
| Minimum switching load |
|
300 (5/5)mW (V/mA) |
| Standard contact material |
|
AgNi |
| Coil specification |
|
0.65 W |
| Nominal voltage |
|
24 VDC |
| Rated power |
|
0.5 W |
| Operating range |
|
17.52 to 36 VDC |
| Holding voltage |
|
9.6VDC |
| Must drop-out voltage |
|
2.4VDC |
| Technical data |
|
|
| Mechanical life (cycles) |
|
10 x 10^6 |
| Electrical life at rated load AC1 (cycles) |
|
100 x 10^3 |
| Operate / release time |
|
7 / 3 ms |
| Insulation between coil and contacts (1.2/50 μs) |
|
6kV (8mm) |
| Dielectric strength between open contacts |
|
1000VAC |
| Ambient temperature range |
|
–40 to +85°C |
| Environmental protection |
|
RT II |
| Dimensions (L x H x W) |
|
29 x 25.5 x 12.4mm |
| Approvals |
|
UL, VDE and CSA |
| Suitable relay base |
|
Finder 9505 DIN rail mounting |
| |
|
Finder 9515 PCB mounting |
