| Specifications |
|
|
| Mains voltage |
|
220-240V 50Hz (+/-15%) |
| Cos |
|
> 0,9 |
| Output |
|
87% typ. |
| Consumption |
|
15A |
| Active power |
|
3500VA |
| Mains fuse |
|
2 x T20A (6,3x32) |
| Charging Characteristics |
|
|
| Number of outputs |
|
3 independent supplies |
| Number of cycles |
|
10 (from 0 to 9), setting by means of a dial |
| Charge curves |
|
In general 3 statuses, type I.U.Uo |
| |
|
Open lead / Airtight lead / Lead calcium |
| |
|
Delphi Type / Optima Type / Wintering open lead |
| |
|
Wintering airtight lead / Gel & AGM |
| |
|
Power supply / LifeSo4 + integrated BMS |
| Temperature compensation |
|
+/-25mV / °C (by an external sensor) |
| Voltage tolerance |
|
+/-2% |
| Ripple |
|
< 1% (BW < 20MHz) |
| Maximum current |
|
80A (+/-5%) |
| Output fuse |
|
5 x 25A (miniature automotive fuse) |
| Protection |
|
|
| Output surge |
|
“Current limited” type |
| Output short circuit |
|
“Shutdown” type with automatic restart once |
| |
|
the fault is cleared |
| Excessive output voltage |
|
“Shutdown” type with automatic restart once |
| |
|
the fault is cleared |
| Battery polarity reversal |
|
Output fuse |
| Excessive internal temperature |
|
“Shutdown” type with automatic restart once |
| |
|
the fault is cleared |
| Operating temperature |
|
-10°C to +55°C |
| Storage temperature |
|
-20°C to +70°C |
| Humidity 10% to 90% |
|
10% to 90% (without condensation) |
| Convection |
|
Forced by a thermostat-controlled fan |
| Case |
|
Wall-mounted case in powder-coated aluminium |
| Protection rating |
|
IP22 |
| Mounting |
|
4 x 4mm Ø screws |
| Overall dimensions (D x W x H) |
|
196 x 346 x 358 mm |
| Weight |
|
11,5 kg |
| Display |
|
Front LED display |
| |
|
Optional remote touchscreen display |
| Mains connector |
|
3-point cage terminal for cables |
| |
|
cross-section of 10mm² max |
| Battery connectors |
|
M8 studs |
| Battery sensor connector |
|
2-point cage terminal for cables |
| |
|
cross-section of 1.5mm² max |
| Alarm relay connector |
|
2-point cage terminal for cables |
| |
|
cross-section of 1.5mm² max |
| External CAN bus connectors |
|
2 x Micro-Fit + 1 x RJ11 |
| Standards |
|
|
| EMC |
|
EN55016-2-1, EN55016-2-1/A1, CISPR 16-2-1 |
| |
|
EN 55016-2-3 + EN 55016-2-3/A1 |
| |
|
IEC 61000-4-3 + A1 + A2 |
| |
|
IEC 61000-4-2, IEC 61000-4-6 |
| |
|
IEC 61000-4-5,IEC 61000-4-4 |
| Environment |
|
IEC 60068-2-30 & IEC 60068-2-1 |
| |
|
(climatic conditions) |
| |
|
IEC 60068-2-52 (salt spray) |
| Mechanical |
|
IEC 60068-2-6 & IEC 60068-2-64 (vibration) test |
| |
|
IEC publication No. 60529 (IP) |
| Safety |
|
EN 60335-1 |
