See also Quartz Crystals
A range of ceramic resonators for use in oscillator circuits providing
a cost effective compact device in a shock resistant, lightweight package.
Specifically designed for use in MOS circuits.
Frequency tolerance ±0.5%.
| sizes in mm | L | H | W | D | P | S2 | t |
| Case 1 | 4.0 | 9.0 | 7.0 | 3.5 | 5.0 | 1.0 | 0.25 |
| Case 1a | 6.0 | 9.3 | 7.9 | 3.6 | 5.0 | 1.0 | 0.25 |
| Case 1b | 4.0 | 9.0 | 7.0 | 3.5 | 5.0 | 1.0 | 0.25 |
| Case 2 | 11.0 | 8.0 | 5.0 | 5.0 | 5.0 | 0.6 | 0.20 |
| Case 3 | 5.0 | 10.0 | 12.0 | 4.5 | 5.0 | 0.6 | 0.20 |
Available in the following frequencies and case formats:
Frequency Case
400kHz
1a
455kHz
1
500kHz
1
560kHz
1b
1.0MHz
2
2.0MHz
2
3.28MHz 2
3.58MHz 2
3.68MHz 2
4.0MHz
2
4.19MHz 2
5.0MHz
1
6.0MHz
3
7.37MHz 1
8.0MHz
3
10.0MHz 3
12.0MHz 3
16.0MHz 3
20.0MHz 3
24.0MHz 3
27.0MHz 3
32.0MHz 3
3-pin ceramic resonators
A range of 3 pin ceramic resonators supplied with built-in capacitors
therefore removing the need for load capacitance when making up oscillator
circuits. Leads on 2.5mm pitch spacing.
The following frequencies, in MHz, are available:
2.00; 3.58; 3.69; 4.0; 4.19; 5.00; 6.0; 7.73; 8.0; 10.00; 11.06;
12.0; 16.00; 20.00; 24.00; 27.00; 32.00 MHz
©ALL MATERIAL IS PROTECTED BY COPYRIGHT LAWS AND MAY NOT BE REPRODUCED IN ANY FORM WHATSOEVER WITHOUT THE PRIOR WRITTEN CONSENT OF THE WEBMASTER.