TOGGLE SWITCHES


APEM 600H and 600NH series

Toggle switches - high amperage
Distinctive features and specifications
  • Construction

    • Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded to the terminal for increased mechanical strength.
  • Rating

    • These switches are suitable for motor loads and power applications up to 15A 250VAC or 10A 400VAC
  • Metal or insulated lever

  • UL, CSA and NF-VDE (EN 61058-1) approved


    • ELECTRICAL SPECIFICATIONS 600H range of APEM Toggle Switches
  • Peak current : 30A max. during 1/2 sine, 250VAC

  • Initial contact resistance : 10 mR max. at 1A 2VDC

  • Insulation resistance : 1,000 MR min. at 500VDC

  • Dielectric strength :

    • 2,000V rms 50 Hz min. between terminals
    2,500V rms 50 Hz min. between terminals and frame
  • Electrical life : 10,000 cycles at full load

    APPROVED RATINGS

    MATERIALS
  • Case : polyester UL94-V0

  • Actuator :

    • -- 600H : brass, nickel plated
    -- 600NH : black polyamide
  • Bushing : brass, nickel plated


  • Contacts : silver/nickel alloy


    • GENERAL SPECIFICATIONS
  • Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut

  • Panel thickness : 4,5 mm (.177) max. between 2 nuts

  • Operating temperature : -20C to +55C
    • 600NH range of APEM Toggle Switches

    Types available:

    631H/2      SP ON-OFF 15A 250V
    639H/2      SP ON-OFF-ON 10A 250V
    641H/2      DP ON-OFF 15A 250V
    641NH/2   DP ON-OFF 15A INSULATED LEVER
    645H/2      DP (ON)-OFF 10A 250V
    646H/2      DP ON-ON 15A 250V
    646NH/2   DP ON/ON 15A 250V INSULATED LEVER
    647H/2      DP (ON)-OFF-(ON) 10A 250V
    648H/2      DP ON-OFF-(ON) 10A 250V
    649H/2      DP ON-OFF-ON 10A 250V
    649NH/2   DP ON-OFF-ON 10A 250V INSULATED LEVER


    APEM 3600NF series
    Sealed toggle switches for outdoor applications
    Distinctive features and specifications:

  • Sealing obtained by :

    • - O-ring between lever and bushing
    - half-length boot and nylon washer (supplied mounted) 3600NF range of APEM Toggle Switches
    - elastomer gasket between cover and case
    - molded-in terminal inserts
    - sealing washer U60
  • Solid silver contacts


  • UL approved


    • MATERIALS
  • Case : phenolic resin

  • Actuator : brass, nickel plated

  • Bushing : brass, nickel plated

  • Contacts : solid silver

  • Max. current/voltage rating with resistive load : 12A 28VDC - 6A 250VAC

  • Initial contact resistance : 10 mR max. at 1A 2VDC
  • 3,000V rms 50 Hz min. between terminals and frame

    Types available:

    3645NF/2   DP (ON)-OFF IP67 20A 28VDC
    3647NF/2   DP(ON)-OFF-(ON) IP67 20A 28VDC
    3648NF/2   DP ON-OFF-(ON) IP67 20A 28VDC

    Available accessories:

    Safety toggle cover and waterproof boot.
     
    Click on the appropriate item you wish to view



    R13-29 series

    FEATURES

    MATERIAL: Metal lever and bushing are nickel plated brass. Frames are metal plated.

    Phenolic base.

    Standard toggle lever.

    Available accessories:

    Safety toggle cover and waterproof boot.
     
    Click on the appropriate item you wish to view R13-29 range of Toggle Switches

    Rating
    15A 125V AC 1/8HP
    10A 250V AC 1/3HP
    Contact resistance: 50m Ohms Max
    Insulation resistance: DC 500V 100M Ohms Min
    Dielectric strength: AC 1500V for 1 minute

    Types available:

    R13-29B    DPDT ON-ON
    R13-29C    SPDT  ON-ON 
    R13-29D    SPDT ON-OFF-ON
    R13-29E    DPDT ON-OFF-ON
    R13-29G    SPDT (ON)-OFF-(ON)
    R13-29H    SPDT ON-OFF-(ON)
    R13-29K    DPDT (ON)-OFF-(ON)

    Click here for outline diagram


    R13-412 series R13-412 range of Paddle Switches

    FEATURES

    MATERIAL: Metal lever; frames and bushing are nylon (UL flame: 94V-2). Terminals are silver plated brass.

    Rating
    10A 125V 1/3HP
    6A 250V 1/2HP
    Contact resistance:50mOhms Max
    Insulation resistance:DC 500V 100MOhms Min
    Dielectric strength:AC 1500V 1 minute

    Types available:

    R13-412C2   SPDT ON-ON
    R13-412D2   SPDT ON-OFF-ON

    R13-61 series
    R13-61 range of Toggle Switches
    FEATURES

    MATERIAL: Metal lever and Phenolic base.

    Types available:

    R13-61L2G   SPST ON-OFF GREEN LED ILLUMINATED 20A 12VDC
    R13-61L2R   SPST ON-OFF RED LED ILLUMINATED 20A 12VDC


    R13-7 series

    FEATURES R13-7 range of Toggle Switches

    MATERIAL: Metal lever and bushing are nickel plated brass. Frames are nickel plated steel.
    Phenolic base.

    Rating
    10A 125V AC
    6A 250V AC
    Contact resistance: 50mOhms Max
    Insulation resistance: DC 500V 100MOhms Min
    Dielectric strength: AC 1500V 1 minute

    Types available:
    R13-6  ON-ON SPDT 6A 250V/10A 125V
    R13-7  ON-OFF-ON SPDT 6A 250V/10A 125V


    RETURN TO SWITCHES MAIN INDEX



    FABIAN ENTERPRISES LTD.
    18-20, MSIDA ROAD,
    GZIRA. GZR 1401.
    MALTA.
    TELEPHONE: (0356) 2131 3283 or 2132 0845
    FAX:  (0356) 2133 8087
    E-MAIL CONTACT
    sales@fabian.com.mt

    ©ALL MATERIAL IS PROTECTED BY COPYRIGHT LAWS AND MAY NOT BE REPRODUCED IN ANY FORM WHATSOEVER WITHOUT THE PRIOR WRITTEN CONSENT OF THE WEBMASTER.

    All Trade names and Trade marks are hereby acknowledged as being the property of the Registered Owners


    ALPHABETICAL LIST OF PRODUCTS: click on section you wish to view:

    A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P|Q|R|S|T|U|V|W|X|Y|Z


    EXIT TO QUICK INDEX

    291006/060507